| SPECIFICATIONS |
| CAPACITY |
| Bed Design |
|
90 degrees |
| Swing over bed |
inch (mm) |
26.75 (680) |
| Standard chuck outer diameter |
inch (mm) |
12 (300) |
| STD turning diameter |
inch (mm) |
10 (255) |
| Max. turning diameter |
inch (mm) |
20 (500) |
| Max. turning length |
inch (mm) |
46.8 (1168) |
| Bar work capacity |
inch (mm) |
3.14 (80) |
| SPINDLE |
| Spindle speed |
RPM (min-1) |
32~3200 |
| Spindle speed ranges |
step |
Stepless |
| Spindle nose |
|
A2-8 |
| Spindle bore diameter |
inch (mm) |
3.75 (95) |
| Bearing inside diameter |
inch (mm) |
5.5 (140) |
|
TURRET HEAD
|
| Type of tool holders |
|
Block/KV Style/ VDI |
| Number of tool stations |
|
12 |
| Turning tool dimension OD/ID |
inch (mm) |
1.0/1.5+2.0 |
| Travel X-axis |
inch (mm) |
10.25 (260) |
| (with Std Block Turret) Z-axis |
inch (mm) |
23 (584) BH/19.5 (495) KV/46 (1170) |
| FEEDRATE |
| Rapid traverse speed X-axis |
IPM/ (M/min.) |
1968 (50) |
| (with Mitsubishi Control) Z-axis |
IPM/ (M/min.) |
1575 (50) |
| Jog feedrate |
inch (mm) |
0~200 (0~5000) |
| Maximum feed per revolution |
IPM/ (M/min.) |
0.001~40 (0.001~1000) |
| Tailstock rapid traverse 2 speed |
IPM/ (M/min.) |
394 (10) rapid traverse - 198 (5) feed rate |
|
TAILSTOCK
|
| Tailstock travel |
inch (mm) |
43.2 (1100) |
| Tailstock spindle taper |
|
morse taper #5 |
| Tailstock travel drive |
|
One touch/m-code programmable |
| MOTORS |
| Spindle drive motor |
HP (KW) |
30 (22) |
| Hydraulic pump motor |
HP (KW) |
1.0 (1.33) |
| Turret servo drive |
HP (KW) |
1.0 (1.33) |
| Servo motor X-axis |
HP (KW) |
4.5 (3.5) |
| (with Mitsubishi control) Z-axis |
HP (KW) |
4.5 (3.5) |
| Coolant pump motor |
HP (KW) |
0.49 (0.37) |
|
COOLANT TANK
|
| Coolant tank capacity |
Gal .(Liter) |
48 (180) |
| POWER SOURCES |
| Electric Power |
KVA |
32 |
| MACHINE WEIGHT |
| Weight (Machine Tool only) |
lbs (kg) |
14250 (6600) |
|
FLOOR SPACE
|
| Length x Width x Height |
inch |
150x79.2x89 |
