| SPECIFICATIONS |
|
| BASIC MACHINE |
| TRAVEL |
| Travel X-axis |
mm (inch) |
245(9.6) |
| Travel Z-axis |
mm (inch) |
630(24.8) |
| CAPACITY |
| Swing over bed |
mm (inch) |
620(24.4) |
| Chuck outside diameter |
mm (inch) |
255(10) |
| Maximum turning diameter |
mm (inch) |
410(16.1)*1 |
| Standard turning diameter |
mm (inch) |
255(10) |
| Maximum turning lenth *2 |
mm (inch) |
600(23.6) |
| Bar work capacity |
mm (inch) |
65(2.5) |
| SPINDLE |
| Spindle nose |
|
A2-8 |
| Spindle speed |
min -1 (rpm) |
20~3600 |
| Spindle through hole diameter |
mm (inch) |
78(3) |
| Number of speed ranges |
|
2 |
| Main bearing ID |
mm (inch) |
130(5.1) |
| FEEDRATE |
| Rapid traverse rate X-axis |
m/min (IPM) |
18(708) |
| Rapid traverse Z-axis |
m/min (IPM) |
20(787) |
| Feed per revolution |
mm (inch) |
0.01~500.00 (0.001~20.0) |
| Jog feedrate |
m/min (IPM) |
0~2000 (0~78) |
| TURRET HEAD |
| Type of turret head |
|
Base holder type |
| No. of tools |
pcs |
12 |
| Turning tool dimension OD/ID |
mm (inch) |
25/50 (1/2) |
| Indexing time |
sec. |
0.3/1face |
| TAILSTOCK |
| Tailstock spindle diameter |
mm (inch) |
90(3.5) |
| Tailstock spindle travel |
mm (inch) |
100(3.9) |
| Tailstock spindle taper hole |
|
MT-5 |
| Tailstock travel type |
|
Manual |
| Tailstock travel |
mm (inch) |
630(24.8) |
| MOTORS |
| Spindle drive motor |
kW(HP) |
18.5/15(25/20) 50%ED/cont. |
| Feed drive motor X-axis |
kW(HP) |
2.0(2.7) |
| Feed drive motor Z-axis |
kW(HP) |
3.0(4) |
| Hydraulic pump motor |
W(HP) |
750(1) |
| Slidewway lubrication pump motor |
W(HP) |
20(1/50) |
| Head stock gear lub. pump motor |
W(HP) |
75(1/10) |
| Coolant pump motor |
W(HP) |
250(1/3) |
| POWER SOURCES |
| Electric power supply |
kVA |
26 |
| Air pressure source |
MPa (kgf/cm2(psi)) |
0.5(5) (70) |
| Machine Weight |
kg(lbs) |
5400(11880) |
| *1 QCT (KV) Turret & VDI Turret: 310(12.2) |
| *2 When selected KM turret, Maximum turning length will be shorter. |
